IN BRIEF
|
The installation of a double split reversible air conditioner may seem complex, but with the right steps and a little method, it becomes accessible to everyone. This practical guide will provide you with clear and precise advice for setting up a system that optimizes comfort in your interior, while preserving energy efficiency. Find out how to choose the right location, make the necessary connections and ensure safe and efficient commissioning of your device.
Installing a double split reversible air conditioner may seem like a complex task, but with the right equipment and instructions, it becomes completely achievable. This practical guide focuses on the key steps to follow to complete this installation, while highlighting the benefits and the disadvantages of this type of air conditioning system. Whether you are a DIY enthusiast or a seasoned professional, this article will provide you with valuable information to optimize your thermal comfort.
Benefits
The double split reversible air conditioner offers several interesting advantages. First of all, it allows two separate rooms to be air-conditioned, thus offering personalized comfort according to the needs of each room. In addition to this, the system is often more economic in terms of energy consumption, because it allows the temperature to be regulated in an efficient and targeted manner.
Another considerable advantage is the ease of installation. Thanks to systems like Ridiclim, it is possible to carry out the installation yourself, without requiring the intervention of a professional. This can also result in significant financial savings. In addition, the R32 refrigerant gas used in these units is less polluting than other alternatives, which contributes to better performance. ecological.
Disadvantages
However, installing a double split reversible air conditioner also has some disadvantages. Among them, the initial purchase cost can be high, which can represent a barrier for some households. Additionally, although installation is simplified, basic technical skills are required to perform the operation correctly, which may not be suitable for everyone.
It is also important to consider that, despite advanced sealing systems, there is still a potential risk of gas leaks if the connections are not made correctly. Finally, the system may require regular maintenance to ensure optimal performance, which may result in additional costs in the long term.
Installing a double split reversible air conditioner may seem complex, but by following this practical guide, you will be able to carry out the installation independently. This type of air conditioner is particularly suitable for air conditioning several rooms without requiring expensive piping work. This tutorial will guide you through the key steps to ensure a successful installation, covering the necessary preparations, connections and commissioning.
Preparing for installation
Before starting the installation, it is essential to determine location ideal for indoor and outdoor units. Indoor units should be placed at least 2 meters above the floor to provide better airflow. Also consider the proximity of electrical outlets and a reasonable distance from windows to avoid direct heat from the sun.
For the outdoor unit, avoid places too exposed to wind or dust. It can be hung on the wall or placed on the floor, depending on your preferences and the space available. Make sure your chosen location has electricity from your home’s distribution board, using a line of three 2.5mm² wires.
Installation of indoor units
Start by installing the indoor units. To do this, attach the mounting plate to the wall using suitable wall plugs. Once the plate is in place, pass the refrigeration pipes and electrical cables through the wall using a perforated hole. Make sure these pipes are oriented correctly and clear the plugs from the connections.
Then connect the refrigeration pipes. Each indoor unit is equipped with two pipes: a small one and a large one. Be sure to use the correct connections, tightening the joints to ensure a perfect seal. In terms of insulation, it is recommended to use foam sheaths around the connections to avoid condensation.
Installing the outdoor unit
Once the indoor units are installed, proceed tooutdoor unit. Before fixing it to the floor or wall, equip it with a condensate drainage system. This step is crucial because it will manage the water that accumulates during the operation of the air conditioner. Use rubber pads under the unit to dampen vibrations.
Then secure the unit using suitable anchors and ensure that it is stable. As with the indoor units, all pipes and cables must be properly grouped in a duct to ensure optimum protection and aesthetics.
Electrical connection and commissioning
Once all the units are secured and the pipes are passed, proceed with the electrical connection. Open the unit covers and connect the electrical wires according to the color codes: blue for neutral, black for phase and brown for earth. Make sure that all the wires are tight and that the covers are back in place.
Finally, open the shut-off valves of the refrigerant pipes to allow gas to flow through the system. Check for leaks using a leak detector product or soapy water. All you have to do is activate the circuit breaker and test the air conditioner using the remote control provided, ensuring that the operating mode is correct.
In this article, we will discover the essential steps to install a reversible double split air conditioner with ease. This guide will provide you with practical advice, tips and recommendations for choosing the right location, making the connections and ensuring a safe and efficient installation.
Choosing the location of the units
Choosing the location of the indoor and outdoor units is crucial to ensure optimal operation of your air conditioning system. The indoor units must be installed at least 2 meters from the ground, away from corners where air circulation may be impeded. For the outdoor units, choose a shaded place, sheltered from wind and debris. Also avoid installing them near the ceiling to facilitate access to the filters.
Preparing for installation
Before beginning installation, gather all necessary tools and materials, including connection pipes, power supply, and accessories such as screws and dowels. Make sure you have suitable trenches to pass the refrigeration tubes and power supply. This will make the work easier and ensure a clean result.
Installation of indoor units
Start by fixing the indoor units using suitable wall brackets. Accurately mark the location of the support, then drill and insert the dowels. Once the units are fixed, make the outputs of refrigeration pipes depending on the configuration of your installation. Connect the pipes to the unit using the screw system which ensures 100% watertightness.
Electrical connection
To ensure the operation of your air conditioner, the electrical connection is complex but essential. Connect the electrical wires in the correct order: blue for neutral, red for live, and green/yellow for ground. Check each connection carefully before closing the indoor unit covers.
Installation of the outdoor unit
Installation of the outdoor unit requires special attention. Install it firmly on a stable base to minimize vibration. Don’t forget to install a condensate drainage system to avoid any accumulation of water. Connect the refrigeration pipes and power supply, while respecting the maximum recommended lengths.
Commissioning
Once all units are installed and connections made, be sure to open the shut-off valves and check for leaks using a leak detection product. Once verified, turn on the system via the circuit breaker, and test operation using the remote control provided.
Air Conditioner Maintenance
To guarantee the durability of your double split reversible air conditioner, regular maintenance is essential. Think about clean the filters every month and inspect the pipes for possible leaks. This will also improve the energy efficiency of your device in the long run.
Comparison of the characteristics of the double split reversible air conditioner
| Criteria | Details |
| System type | Double split reversible air conditioner |
| Number of units | 2 indoor units and 1 outdoor unit |
| Facility | Can be done by a DIYer |
| Energy used | R32 refrigerant gas, low consumption |
| Maximum distance | 12 meters between units |
| Connection system | Rudy air conditioning, simple screwing |
| Waterproofing | 100% waterproof system, without gas leaks |
| Power supply | Via board, 3 wires of 2.5 mm² |
| Accessibility | Easy access to filters and connections |
| Operating modes | Cooling and heating |
Testimonials on the installation of a double split reversible air conditioner
I recently had a double split reversible air conditioner installed in my home, and I have to say it was a lot simpler than I had imagined. Thanks to the practical guide that I followed, I managed to install the indoor unit without the intervention of a professional. Each step was described clearly and precisely, which gave me confidence in my skills.
The first step was to define theideal location for indoor and outdoor units. The guide gave me recommendations on how far away from the ceiling and windows I should be, which was very helpful. Once that was done, I felt ready to begin the actual installation.
The system of connection was particularly well thought out. Thanks to the technology in place, I only had to screw in the pipes, which made the installation quick and easy. I also like that the air conditioner comes pre-charged in refrigerant gas, which avoids complicated manipulations.
Another thing to highlight is the ease of access to the filters in the indoor units once installed. The guide recommends choosing locations that allow easy access, and this has actually made maintenance much less arduous.
Finally, getting started was a real satisfaction. In no time, I was able to enjoy fresh air in my living room. Using the remote control is intuitive, and I can easily change the modes of refreshment and of heating. This guide gave me the autonomy I was looking for, and I am delighted with the performance of my new air conditioning system.
Installing a double split reversible air conditioner may seem complex, but with the right steps and a little preparation, it becomes doable, even for an amateur DIYer. This guide will provide you with detailed recommendations and tips for completing the installation methodically. From site selection to commissioning, each step is crucial to ensure the performance and efficiency of your air conditioning system.
1. Preparing for installation
Before you begin, it is essential to gather all the necessary materials. You will need:
- Indoor unit And outdoor unit
- Refrigerant pipes and of electrical connections
- Mounting brackets And ankles for secure fixation
- Miscellaneous tools such as drill, screwdriver, adjustable wrenches, and spirit level
Proper preparation and checking your equipment will make installation much easier.
2. Choice of location
Choosing the location for your units is crucial. THE indoor units must be placed at least 2 meters from the ground, while ensuring that they can be easily accessible for maintenance. Avoid installing them near heat sources or too close to the ceiling. For the outdoor units, the ideal is a well-drained location protected from the wind, and with minimal exposure to dust.
Also make sure that your chosen location has a suitable electrical outlet and that you have access to your home’s electrical panel.
3. Installation of indoor units
Start with the installation of the indoor units. Using a spirit level, trace the location of the mounting brackets on the wall. Once fixed, proceed to:
- The breakthrough of the wall to pass refrigeration pipes and electrical cables.
- The connection pipes respecting the size (large and small) and ensuring good tightening.
Use foam sleeves to insulate connections and prevent condensation.
4. Installation of the outdoor unit
Once the indoor units are installed, move on to the outdoor unit. Make sure it is properly secured and does not move during operation. The unit must be placed on a solid and stable support. Check that the drainage pipes are in good condition to avoid any water overflowing onto the ground.
Consider installing rubber pads to absorb vibrations.
5. Final connections and commissioning
Next comes the electrical connection. Follow the manufacturer’s instructions for making electrical connections adapted. Be sure to use proper wiring in accordance with current standards.
Finally, open the service valves to charge the system by refrigerant gas and check the tightness of the connections. With the remote control, test operation in cooling mode then in heating mode to confirm that everything is working correctly. Also check the silence and performance of your air conditioner.
Install a double split reversible air conditioner may seem like a complex task, but with a little preparation and the right tools, this operation can be carried out by a knowledgeable DIYer. This type of air conditioner is particularly advantageous because it allows several rooms to be cooled and heated efficiently, while offering great installation flexibility.
Before starting the installation, it is crucial to define the ideal location for the indoor and outdoor units. The indoor unit should be placed at an appropriate height to promote air circulation, while the outdoor unit should be installed in a location sheltered from wind and direct sunlight. The distance between units must not exceed 12 meters, to ensure optimal performance.
Once the locations have been chosen, it is necessary to prepare the refrigeration pipes and power supply. Thanks to modern systems such as Ready Clim, the connection of the pipes is done simply and watertight by screwing, thus avoiding gas leak problems. It is also essential to follow electrical safety standards by using appropriate wires for power supply.
During installation, follow the manufacturer’s instructions step by step, taking care to properly adjust each element and check the tightness of the connections. Once everything is in place, simply test the system using the remote control to ensure the air conditioner is working properly.
By following these steps carefully, installing a double split reversible air conditioner becomes an achievable task that will considerably improve the comfort of your home.
FAQ: Installation of a double split reversible air conditioner
Q: What is a double split reversible air conditioner? A double split reversible air conditioner is a system that cools or heats two rooms using a single outdoor unit and two indoor units.
Q: What tools are needed for installation? You will need various tools such as a drill, adjustable wrenches, a spirit level, dowels, a screwdriver, and personal protective equipment.
Q: How to choose the location of indoor and outdoor units? It is important to choose locations at least 2 meters above the ground for indoor units and place the outdoor unit in an area protected from strong winds and direct exposure to sunlight.
Q: What types of pipes are required for connection? You will need two refrigeration pipes (one small and one large), a condensate drain and a power supply.
Q: How are the pipes connected? The connection of the pipes is done by simple screwing thanks to the system Ready Clim, which guarantees 100% waterproofing.
Q: Can I install the air conditioner myself? Yes, air conditioning Airton is designed to be installed by DIY enthusiasts without professional help.
Q: What are the electrical requirements for installation? The outdoor unit must be powered by a power line from the distribution board, usually with three 2.5mm² wires.
Q: What to do after installation is complete? Once installation is complete, simply turn the breaker back on and test the system using the remote control provided.
Q:How to check if there is gas leak after installation? To check for leaks, you can use a leak detection product or soapy water and watch for bubbles to form.
Q: What are the advantages of a reversible air conditioner? A reversible air conditioner cools in summer and heats in winter, providing an efficient and economical solution for year-round comfort.
Q: What is the average cost of installing a reversible air conditioner? The cost varies depending on the model and complexity of the installation, but is generally lower than professional installation for a traditional system.